Jump to content

how to reach to the main page of HDCorea


Recommended Posts

This content is hidden until you react to this post and reload the page. Sign In or sign Up now to view this post.}
Link to comment
Share on other sites

How to access BtS (a.k.s. Born to Seed)

You should modify your hosts file by adding BtS hostname and IP address manually to access BtS server since our tracker is not registered to the public DNS system.

Therefore you must understand that you won't be able to access the tracker at all if you don't memorize or remember the following instructions on how to access server access.

And the very first thing to know is how to find the BtS server IP address.

1. Finding Server IP address

Preparation

1) Go to the web site http://www.btshd.net and find the hidden messages below 'Page not found' screen.

2) Please click the page and highlight them by pressing ctrl+a key even though it seems the page is not accessible.(Just do it!) Using the strings hidden in this page, you'll start to find the right IP address of the tracker.

How to find the IP address of the tracker

If the hidden message is 101234567891119/Online/1221 then please focus on the numbers 101234567891119 first. The first step is to remove the 1st/2nd digit 10 and last digit 9 from the original number and divide them into 4 number of pieces like an example below. The last step is to put those 3 digit numbers in reverse order. Let's see the example to understand this quickly.

Eg. 11234567891119(Hidden in the page) -> 10 123456789111 9 -> 123456789111 (Remove 10 and 9)

- 123.456.789.111 (divide them into 4 number of pieces) -> 111.789.456.123 (put those 3 digit numbers in reverse order. If the the number is a.b.c.d then replace them like this d.c.b.a)

-> So in this case, the final DNS Server IP is 111.789.456.123.

One more thing you need to know is deleting front zero in IP octet if it starts with 0. For example, if you got 100.200.010.002 then, the final IP address should be 100.200.10.2 by deleting front zero from it.

Additional information is available in the message and here's how to read them.

Online - This means the server status. If it's down, Offline would be shown.

1221 - This digits means the month and day of BtS status change. And it means the server became online from Dec. 21 with above IP address.

Thus the final interpretation for this message is 'BtS server became online from Dec.21 with IP address 111.789.456.123'.

2. How to set up BtS IP address from the PC/Client

If you found BtS IP address from above instruction, you need to apply them in your hosts file.

Editing hosts file

If you do not want to modify DNS address or do not want to use BtS DNS address, you can edit hosts file to see the same effect.

hosts file is a file that contains a list of host name and IP address to resolve domain names. For example, if you add 1.1.1.1 abc.org at the hosts file, your PC will refer to 1.1.1.1 when abc.org is called from web browser, etc. And the same goes to BtS Server which means you'll be directed to BtS server when you add BtS IP address and hostname accordingly in the hosts file.

Newbie at networking :

Download and install this file at your Windows and run the executable file 'Win Host File Editor'. It will automatically open your hosts file from \windows\system32\drivers\etc folder. All you have to do is adding IP and hostname like 1.1.1.1 abc.org. Exit after saving is the last job. E.g. if you found 1.2.3.4 from above scenario then add 1.2.3.4 hdcorea.goanygate.com in it.

Experienced Users :

Windows, OSX, *nix users can open hosts file using any editing software like notepad, vi, etc. and add something like 1.2.3.4 hdcorea.goanygate.com.

The following example is editing hosts file at Windows platform.

a. location of hosts file : C:\WINDOWS\system32\drivers\etc. (This should be open with the administrator’s privileges when you run Windows Vista/7 platform)

b. If you see something similar to the following contents, Enter BtS Server IP Address(eg. 111.222.333.444) and hdcoreacorea.goanygate.com together.

# Copyright ¨Ï 1993-2006 Microsoft Corp.

#

# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.

#

# This file contains the mappings of IP addresses to host names. Each

# entry should be kept on an individual line. The IP address should

# be placed in the first column followed by the corresponding host name.

# The IP address and the host name should be separated by at least one

# space.

#

# Additionally, comments (such as these) may be inserted on individual

# lines or following the machine name denoted by a '#' symbol.

#

# For example:

#

# 102.54.94.97 rhino.acme.com # source server

# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost

::1 localhost

111.222.333.444 hdcorea.goanygate.com

-------------------------------------------------------------------------------------

Now save and Exit. Restart your browser and open http://hdcorea.goanygate.com. If you still can't open the site index page, run cmd from windows and enter 'ipconfig/flushdns' to clear DNS caches stored in the computer. finally restart your web browser and try again.

For *nix machine, you can edit hosts file in /etc directory using vi, pico, etc. Adding like 1.2.3.4 hdcorea.goanygate.com at the end of the file would make you enter the site.

3. Entering the tracker

Try to go to page http://hdcorea.goanygate.com/tb to access BtS tracker. It means it's successful if you see the main page of the tracker. If you can't see anything from web browser, then you need to double check if the hosts file was correctly configured.

How to verify your PC is referring to HOSTS file that you configured

Open cmd window, run command 'ping hdocrea.goanygate.com -t' and check if you see the similar results like below.

C:\Users\abc>ping hdcorea.goanygate.com -t

Ping hdcorea.goanygate.com [111.789.456.123] 32bytes data used:

Request timed out!

Request timed out!

Statistic for ping to 111.789.456.123:

packet: sent = 2, received = 0, loss = 2 (100% loss)

It's OK to see the timed out message as long as you see the same IP address (In this case, it is the 'Ping hdcorea.goanygate.com [111.789.456.123] 32bytes data used') with the BtS IP address that you found from www.btshd.net. If you don't see the same IPs from this test, then DNS IP address should be correctly re-configured.

One last thing when still having a problem in accessing the site is adding your new IP address if it's changed since your last visit to the tracker because our tracker only allows users to access it from the registered IP address range to make it more secure. For this instruction, please check the main help page link 'Adding new IP range to the Site'

211.221.224.98

211.221.224.98 hdcorea.goanygate.com

  • Upvote 2
Link to comment
Share on other sites

How to access BtS (a.k.s. Born to Seed)

You should modify your hosts file by adding BtS hostname and IP address manually to access BtS server since our tracker is not registered to the public DNS system.

Therefore you must understand that you won't be able to access the tracker at all if you don't memorize or remember the following instructions on how to access server access.

And the very first thing to know is how to find the BtS server IP address.

1. Finding Server IP address

Preparation

1) Go to the web site http://www.btshd.net and find the hidden messages below 'Page not found' screen.

2) Please click the page and highlight them by pressing ctrl+a key even though it seems the page is not accessible.(Just do it!) Using the strings hidden in this page, you'll start to find the right IP address of the tracker.

How to find the IP address of the tracker

If the hidden message is 101234567891119/Online/1221 then please focus on the numbers 101234567891119 first. The first step is to remove the 1st/2nd digit 10 and last digit 9 from the original number and divide them into 4 number of pieces like an example below. The last step is to put those 3 digit numbers in reverse order. Let's see the example to understand this quickly.

Eg. 11234567891119(Hidden in the page) -> 10 123456789111 9 -> 123456789111 (Remove 10 and 9)

- 123.456.789.111 (divide them into 4 number of pieces) -> 111.789.456.123 (put those 3 digit numbers in reverse order. If the the number is a.b.c.d then replace them like this d.c.b.a)

-> So in this case, the final DNS Server IP is 111.789.456.123.

One more thing you need to know is deleting front zero in IP octet if it starts with 0. For example, if you got 100.200.010.002 then, the final IP address should be 100.200.10.2 by deleting front zero from it.

Additional information is available in the message and here's how to read them.

Online - This means the server status. If it's down, Offline would be shown.

1221 - This digits means the month and day of BtS status change. And it means the server became online from Dec. 21 with above IP address.

Thus the final interpretation for this message is 'BtS server became online from Dec.21 with IP address 111.789.456.123'.

2. How to set up BtS IP address from the PC/Client

If you found BtS IP address from above instruction, you need to apply them in your hosts file.

Editing hosts file

If you do not want to modify DNS address or do not want to use BtS DNS address, you can edit hosts file to see the same effect.

hosts file is a file that contains a list of host name and IP address to resolve domain names. For example, if you add 1.1.1.1 abc.org at the hosts file, your PC will refer to 1.1.1.1 when abc.org is called from web browser, etc. And the same goes to BtS Server which means you'll be directed to BtS server when you add BtS IP address and hostname accordingly in the hosts file.

Newbie at networking :

Download and install this file at your Windows and run the executable file 'Win Host File Editor'. It will automatically open your hosts file from \windows\system32\drivers\etc folder. All you have to do is adding IP and hostname like 1.1.1.1 abc.org. Exit after saving is the last job. E.g. if you found 1.2.3.4 from above scenario then add 1.2.3.4 hdcorea.goanygate.com in it.

Experienced Users :

Windows, OSX, *nix users can open hosts file using any editing software like notepad, vi, etc. and add something like 1.2.3.4 hdcorea.goanygate.com.

The following example is editing hosts file at Windows platform.

a. location of hosts file : C:\WINDOWS\system32\drivers\etc. (This should be open with the administrator’s privileges when you run Windows Vista/7 platform)

b. If you see something similar to the following contents, Enter BtS Server IP Address(eg. 111.222.333.444) and hdcoreacorea.goanygate.com together.

# Copyright ¨Ï 1993-2006 Microsoft Corp.

#

# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.

#

# This file contains the mappings of IP addresses to host names. Each

# entry should be kept on an individual line. The IP address should

# be placed in the first column followed by the corresponding host name.

# The IP address and the host name should be separated by at least one

# space.

#

# Additionally, comments (such as these) may be inserted on individual

# lines or following the machine name denoted by a '#' symbol.

#

# For example:

#

# 102.54.94.97 rhino.acme.com # source server

# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost

::1 localhost

111.222.333.444 hdcorea.goanygate.com

-------------------------------------------------------------------------------------

Now save and Exit. Restart your browser and open http://hdcorea.goanygate.com. If you still can't open the site index page, run cmd from windows and enter 'ipconfig/flushdns' to clear DNS caches stored in the computer. finally restart your web browser and try again.

For *nix machine, you can edit hosts file in /etc directory using vi, pico, etc. Adding like 1.2.3.4 hdcorea.goanygate.com at the end of the file would make you enter the site.

3. Entering the tracker

Try to go to page http://hdcorea.goanygate.com/tb to access BtS tracker. It means it's successful if you see the main page of the tracker. If you can't see anything from web browser, then you need to double check if the hosts file was correctly configured.

How to verify your PC is referring to HOSTS file that you configured

Open cmd window, run command 'ping hdocrea.goanygate.com -t' and check if you see the similar results like below.

C:\Users\abc>ping hdcorea.goanygate.com -t

Ping hdcorea.goanygate.com [111.789.456.123] 32bytes data used:

Request timed out!

Request timed out!

Statistic for ping to 111.789.456.123:

packet: sent = 2, received = 0, loss = 2 (100% loss)

It's OK to see the timed out message as long as you see the same IP address (In this case, it is the 'Ping hdcorea.goanygate.com [111.789.456.123] 32bytes data used') with the BtS IP address that you found from www.btshd.net. If you don't see the same IPs from this test, then DNS IP address should be correctly re-configured.

One last thing when still having a problem in accessing the site is adding your new IP address if it's changed since your last visit to the tracker because our tracker only allows users to access it from the registered IP address range to make it more secure. For this instruction, please check the main help page link 'Adding new IP range to the Site'

211.221.224.98

211.221.224.98 hdcorea.goanygate.com

Buddy i have no idea as to what my PIN is. How do i get it to reset. I have tried the irc, no use!!

Link to comment
Share on other sites

Guest typhoon

you can't reset the PIN. It's the same for everyone I believe.

Buddy i have no idea as to what my PIN is. How do i get it to reset. I have tried the irc, no use!!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.